JVCC HZ-DT1 Hazard Duct Tape: 2 in. x 60 yds. (Black with Yellow stripes)

JVCC HZ-DT1 Hazard Duct Tape: 2 in. x 60 yds. (Black with Yellow stripes) Reviews

Other Picture

JVCC HZ-DT1 Hazard Duct Tape: 2 in. x 60 yds. (Black with Yellow stripes) Feature

• Adhesive: natural rubber
• Backing/Carrier: 70 mesh polyethylene coated cloth
• Thickness: 11.8 mils (total)
• Adhesion: 29 ounces per inch (to stainless steel)
• Tensile Strength: 35 pounds per inch (longitudinal)

JVCC HZ-DT1 Hazard Duct Tape is a high quality polyethylene coated cloth duct tape, with a residue free natural rubber adhesive. Striped safety warning duct tape is used for permanent and temporary marking of hazardous areas, floors, aisles, stairs, wires, and cords. HZ-DT1 Hazard Duct Tape is ideal for use in manufacturing, as well as in convention & exhibition halls and residential & commercial sites. Hand-tearable and easy to use and unwind so wide widths can be used. Peels off cleanly upon removal, leaving no residue. Widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on a plain white core.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 04, 2011 04:41:04

Hazard Warning Tape - Black/Yellow

Hazard Warning Tape - Black/Yellow Reviews

Other Picture

Required by OSHA 1910.44 to signal physical hazards. Made of tough 7 mil. VC vinyl. Each roll of 2in. wide, pressure sensitive tape is 18 yards long. Tape Type: Warning, Color: Black/Yellow, Material: 7 mil. VC Vinyl, Adhesive Backing: Yes, Dimensions: L (ft.) x W (in.): 54 x 2

Visit Store Now !!

Detail Products

Detail Reviews

Jul 21, 2011 10:08:05

JVCC HZ-8 Hazard Warning Tape: 2 in. x 18 yds. (Black with Yellow stripes)

JVCC HZ-8 Hazard Warning Tape: 2 in. x 18 yds. (Black with Yellow stripes) Reviews

Other Picture

JVCC HZ-8 Hazard Warning Tape: 2 in. x 18 yds. (Black with Yellow stripes) Feature

• Adhesive: synthetic rubber
• Backing/Carrier: polyvinyl chloride (PVC) film
• Certifications: OSHA 1910.144
• Thickness: 6 mils (total)
• Adhesion: 13.7 ounces per inch (to stainless steel)

JVCC HZ-8 Hazard Warning Tape is a conformable soft PVC vinyl tape used for aisle, exit, floor, restricted and hazardous area marking. It is also used for striping. Helps to comply with OSHA requirements per paragraph 1910.144 of the Federal Register. JVCC HZ-8 striped hazard warning tape features a self-extinguishing synthetic rubber adhesive and it will not corrode copper, brass, steel, or aluminum. Color choices include: Black/yellow which is typically used for physical hazard/caution. Red/white for fire equipment/first aid. Black/white for traffic/housekeeping. Green/white for decorative identification. Magenta/yellow for radiation hazard. The diagonal stripes on the tape are approximately 2-3/4" long (measured at the edge of the roll). NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 16.5m. This tape is typically cut to width from log rolls so most sizes ship on a plain white core.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 11:25:17

Floor Sign - Caution With Hazard Stripes

Floor Sign - Caution With Hazard Stripes Reviews

Other Picture

FLOOR SIGNS Facility Floor Signs: Caution: Hazard Stripe/ Blank This convenient sign has two messages printed on it: one on the inside of the plastic base, and one on the outside. Made of lightweight 4 mil corrugated polyethylene, this sign is completely water proof. When not in use, simply fold up and store away to save space. 20.00 L. 1.00 W. 12.00 H.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 19, 2011 02:00:05

JVCC HZ-8LP Laminated Premium Hazard Warning Tape: 2 in. x 18 yds. (Black with Yellow stripes)

JVCC HZ-8LP Laminated Premium Hazard Warning Tape: 2 in. x 18 yds. (Black with Yellow stripes) Reviews

Other Picture

JVCC HZ-8LP Laminated Premium Hazard Warning Tape: 2 in. x 18 yds. (Black with Yellow stripes) Feature

• Adhesive: rubber
• Backing/Carrier: polyvinyl chloride (PVC) film
• Certifications: CID A-A-1689B Type II
• Thickness: 9 mils (total)
• Adhesion: 22 ounces per inch (to stainless steel)

JVCC HZ-8LP Laminated Premium Hazard Warning Tape is a PVC vinyl tape with a 2 mil over-lamination. The tape is scuff resistant and it resists oil, grease, solvents and moisture. JVCC HZ-8LP is used for marking fire equipment, exits, hazardous areas, floors and first aid points. It also meets government specification A-A-1689B Type II. Widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 16.5m. This tape is typically cut to width from log rolls so most sizes ship on a plain white core.

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 00:02:15