JVCC REF-S Engineering Grade Striped Reflective Tape: 2 in. x 15 ft. (Red with White Stripes) Reviews
Other Picture
JVCC REF-S Engineering Grade Striped Reflective Tape: 2 in. x 15 ft. (Red with White Stripes) Feature
- Adhesive: acrylic
- Backing/Carrier: polyester/vinyl
- Release Liner: 80# poly-coated Kraft paper
- Certifications: Federal specification No. LS-300C (Reflectivity 1, Class 1) and FP-85 (Type II)
- Thickness: 6.8 mils (total)
JVCC REF-S Engineering Grade Striped Reflective Tape is used for safety applications and is primarily designed for permanent and temporary traffic signage. It is a polyester/vinyl tape coated with an acrylic adhesive. Use to help prevent accidental damage to shelves/racks, loading docks and poles. Diagonal stripes on the tape are approximately 2-7/8" long (measured along the side edge of the roll). REF-S Reflective Tape meets Federal specification No. LS-300C (Reflectivity 1, class 1) and FP-85 (Type II). Red with White stripes is not recommended for long term outdoor use due to fading. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 5 yds. This tape is typically cut to width from log rolls so most sizes ship on a plain white core.
Visit Store Now !!
May 12, 2011 22:04:05
1 comment:
Highway 1 stocks a wide range of high quality carpark safety products including speed bumps,cable protectors,kerb ramps, parking blocks & corner protectors,wheel chocks,corner guard and other carpark furniture and apparel for both commercial and residential purposes.
Post a Comment